Chris Kilpin Machinery

Pneumatic Gear Cropper

British Made

Graule KS Mitre Saw for Beading

The Ultimate Bead Saw !

Graule ZS170N

Cross Cut Mitre Saw for Cutting BIG

Laser Line Generator Kit

Self Adhesive Teflon

FOM Panda 400 Up Stroke Saw

Jepson Dry Cutters

Graule logo Small

 

 

 

Graule KS

The Ultimate Heavy Duty Bead Saw

(Shown with Optional Pneumatic clamps)

 

  • Mitre saw for easy crosscut of mouldings
  • Sturdy cast iron / Ali construction built to last (Not a portable machine)
  • Single or Three Phase
  • Optional Pneumatic clamps with manual or semi auto operation
  • Very User Friendly with good weight balance
  • Direct Drive Motor
  • An axis running in ball bearings on both sides is situated as rotation fulcrum beneath the supporting table thus assisting material cut rapid miter setting up to 45 readjustable positive stops lower saw blade protection suitable for connection with suction plant

 

GRAULE KS CUTTING GIF1

Graule KS Mitre Saw 5 Link

(Shown with Optional Stand, Bead stick and Pneumatic Clamps)

Technical data:

 

motor
230 V / 1.8 kW
400 V / 2.0 kW
speed
 
2800 U/min
length of cut
115 mm (bei 90°)
82 mm (bei 45°)
depth of cut
55 mm
miter range
horizontally
 
45°-90°-45°
miter range
vertically
 
 
sawblade-Ø
 
250 mm
suction plant
 
55 mm
weight
 
45 kg

 

Graule KS Features

Graule KS Breakdown

 


 Click to Enlarge:

info


Cutting Fluid Link


 Graule logo Small

 

 

Graule ZS 170 N

Extremely Heavy Duty Machine for cutting large Aluminium, Plastic or Wood Sections

The Most cost effective solution for cutting big profiles accurately

Massive170mm x 410mm Capacity at 90 Degrees

Details:

  • Crosscut and mitre saw with maximum depth of cut of 170 mm
  • Sturdy cast iron construction
  • Precise ball bearing guide of the tool carrier on hardened and grounded steel shafts
  • Manual feed
  • Rapid mitre setting up to 65° horizontally and up to 45° vertically readjust able positive stops lower saw blade protection suitable for connection with suction plant
 

Technical data:

model
ZS 170N
motor
400 V / 2.0 kW
speed
3500 U/min
length of cut
410 mm (at 90°)
depth of cut
170 mm (at 90°)

miter range horizontally

45°-90°-25°

miter range vertically

90°-45° (links)
sawblade-Ø
420 mm
suction plant
100 mm
weight
120 kg

 

 

 Break Down of Standard Aluminium Spec Machine:

Graule ZS170N Break Down

 

Optional Acute Angle Attachment for cutting tight angles but still holding the material:

Graule Acute Angle Attachment

 

 

Click to Enlarge: 

 


Common Graule ZS170N  and General Graule Spares

Graule logo Small

 

 

 Spares Banner Graule 6

Graule ZS170N Drive Belts

Return Spring and Cable

Contactor Switch EMS Cover
 
Complete Start Box   Adjustable Front Guard Table Insert  Complete Table 
Graule Saw Blade Graule Brake Fan Aluminium Back Fences Head Angle Lock Handle
Graule AKF 4 End Miller Motor Complete Graule ZS170/N Replacement Motor Complete Graule ZS170/N Hydro Check Damper Valve ZS170N/ZS170 Lower Guard Casting
ZS170N Head Lock Pin Old Type ZS170/ZS200 Head Return Spring Unit Steel Back Fences ZS200/ZS170/N Graule KS Return Spring

 
Replacment Laser Unit for ZS170/ZS200

AKF 4 EndMiller Return Spring

Graule Air Cylinders  Clamp Valve 
 
 
 
 
 Brake Rectifier  Blade Flange and Left Hand Bolt  Coolant Bottle  Start Stop Box for 3 Kw Motor
     
Roller Table Magnifiying Sight Glass      

Many Parts stocked, all parts can be got in from Germany typically in 5-6 days please call for details 01934 625850 or email: This email address is being protected from spambots. You need JavaScript enabled to view it.

 


Cutting Fluid Link


 

Graule logo Small

 

 

 

 


zs200main

Extremely heavy duty Cross Cut Mitre Saw for Cutting Aluminium, Plastics and Wood

HUGE 200mm x 420mm Capacity at 90 Degrees !

Details:

  • Crosscut and miter saw with maximum depth of cut of 200 mm
  • Sturdy cast iron construction
  • Precise ball bearing guide of the tool carrier on hardened and grounded steel shafts
  • Manual feed
  • Rapid miter setting up to 65° horizontally and up to 45° vertically (up to 60° ZS 200N)readjustable positive stops lower
  • Saw blade protection suitable for connection with suction plant

 

 

Technical data:

model
ZS 200N
motor
400 V / 5.0 kW
speed
2800 U/min
length of cut
420 mm (bei 90°)
depth of cut
200 mm (bei 90°)

miter range
horizontally

45°-90°-20°

miter range
vertically

60°-90°-30°
sawblade-Ø
520 mm
suction plant
 
 
100 mm
weight
310 kg
 
 
 
Click to Enlarge:
 
 
info
Cutting Fluid Link

 

 

Graule AKF1 Endmiller

 

  • End milling machines model AKF 1 and AKF 2 for rectangular milling within a range of 8 mm flip-over height
  • Cutting depth and cutting height can be adjusted exactly via a handwheel
  • High cutting speed due to the large cutter diameter
  • Sturdy cast iron constructionprecise ball bearing guide of the tool carrier on hardened and grounded steel shaftsmanual feed the cutter spindle of end milling machine model AKF 2 is running in ball bearings on both sides on the tool side

 

Technical data:

 

model
AKF 2
AKF 1
motor
400 V / 2.0 kW
 
speed
2800 U/min
 
cutter-Ø
250 mm
200 mm
cutter supporting device Ø
 
40 mm

milling spindle length

8.5 mm
6.5 
(8.5 mm)

milling width

320 mm
350 mm
milling depth
80 mm
45 mm
thickness of profile
80 mm
 
suction plant
-
 
weight
95 kg
87 kg

 



 

 

 

Graule AKF4 Link

 

 

  • End milling machine model AKF 4/200 and AKF 4/250 for rectangular milling operations up to 90 mm.
  • Cutting depth and cutting height precisely adjustable via hand wheel
  • High cutting speed through big cutter diameter
  • Sturdy cast iron constructionprecise ball bearing guide of the tool carrier on hardened and grounded steel shaftsmanual feed the cutter supporting device is running in ball bearings on both sides thus assuring a smooth and non-oscillating milling operation.

 

Technical data:

 

 

model
AKF 4/200
AKF 4/250
motor
400 V / 2.0 kW
 
speed
2800 U/min
 
cutter-Ø
200 mm
250 mm
cutter supporting device Ø
 
40 mm

milling spindle length

75 mm
90 mm

milling width

350 mm
milling depth
45 mm
80 mm
thickness of profile
130 mm
140 mm
suction plant  
80 mm
weight
85 kg
95 kg

 


 

 

 

Graule AKF 6200 End Miller

 

 

 

  • End milling machines model AKF 6/250 and AKF 6/300 rectangular and bevel milling operations up to 160 mm
  • The working stroke of the milling unit can be adjusted to the profile width within seconds, thus shortening the work flow considerably
  • High cutting speed due to high number of revolutions (4000 rpm) and large cutter diameter
  • Sturdy cast iron construction precise ball bearing guide of the tool carrier on hardened and grounded steel shaftsmanual feed The cutter supporting device is running in ball bearings on both sides thus assuring a smooth and non-oscillating milling operation.

 

Technical data:

model
AKF 6/250
AKF 6/300
motor
400 V / 3.0 kW
 
speed
4500 U/min
3600 U/min
cutter-Ø
250 mm
300 mm
cutter supporting device Ø
 
40 mm

milling spindle length

 
100 mm
milling width
305 mm
375 mm
milling depth
80 mm
105 mm
thickness of profile
150 mm
 
suction plant
80 mm
weight
190 kg
225 kg

 



 

 

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.

Ok