Chris Kilpin Machinery

Pneumatic Gear Cropper

British Made

Graule KS Mitre Saw for Beading

Laser Line Generator Kit

Self Adhesive Teflon

Flip Stop Kits

FOM Panda 400 Up Stroke Saw

Jepson Dry Cutters

Brush Strip

Graule KS

The Ultimate Heavy Duty Bead Saw

(Shown with Optional Pneumatic clamps)

 

  • Mitre saw for easy crosscut of mouldings
  • Sturdy cast iron / Ali construction built to last (Not a portable machine)
  • Single or Three Phase
  • Optional Pneumatic clamps with manual or semi auto operation
  • Very User Friendly with good weight balance
  • Direct Drive Motor
  • An axis running in ball bearings on both sides is situated as rotation fulcrum beneath the supporting table thus assisting material cut rapid miter setting up to 45 readjustable positive stops lower saw blade protection suitable for connection with suction plant

 

GRAULE KS CUTTING GIF1 

Technical data:

 

motor
230 V / 1.8 kW
400 V / 2.0 kW
speed
 
2800 U/min
length of cut
115 mm (bei 90°)
82 mm (bei 45°)
depth of cut
55 mm
miter range
horizontally
 
45°-90°-45°
miter range
vertically
 
 
sawblade-Ø
 
250 mm
suction plant
 
55 mm
weight
 
45 kg

 


 Click to Enlarge:

info


Cutting Fluid Link


 

Graule ZS 170 N

Extremely Heavy Duty Machine for cutting large Aluminium, Plastic or Wood Sections

The Most cost effective solution for cutting big profiles accurately

Massive170mm x 410mm Capacity at 90 Degrees

Details:

  • Crosscut and mitre saw with maximum depth of cut of 170 mm
  • Sturdy cast iron construction
  • Precise ball bearing guide of the tool carrier on hardened and grounded steel shafts
  • Manual feed
  • Rapid mitre setting up to 65° horizontally and up to 45° vertically readjust able positive stops lower saw blade protection suitable for connection with suction plant
 

Technical data:

model
ZS 170N
motor
400 V / 2.0 kW
speed
3500 U/min
length of cut
410 mm (bei 90°)
depth of cut
170 mm (bei 90°)

miter range horizontally

45°-90°-25°

miter range vertically

90°-45° (links)
sawblade-Ø
420 mm
suction plant
100 mm
weight
120 kg

 

Click to Enlarge: 

 


Common Graule ZS170N  and General Graule Spares 

 

Graule ZS170N Drive Belts

Return Spring and Cable

Contactor Switch EMS Cover
 
Complete Start Box   Adjustable Front Guard Table Insert  Complete Table 
Graule Saw Blade Graule Brake Fan Aluminium Back Fences Head Angle Lock Handle
Graule AKF 4 End Miller Motor Complete Graule ZS170/N Replacement Motor Complete Graule ZS170/N Hydro Check Damper Valve ZS170N/ZS170 Lower Guard Casting
ZS170N Head Lock Pin Old Type ZS170/ZS200 Head Return Spring Unit Steel Back Fences ZS200/ZS170/N Graule KS Return Spring

 
Replacment Laser Unit for ZS170/ZS200

AKF 4 EndMiller Return Spring

Graule Air Cylinders  Clamp Valve 
 
 
 
 
 Brake Rectifier  Blade Flange and Left Hand Bolt  Coolant Bottle  Start Stop Box for 3 Kw Motor
     
Roller Table Magnifiying Sight Glass      

Many Parts stocked, all parts can be got in from Germany typically in 5-6 days please call for details 01934 625850 or email: This email address is being protected from spambots. You need JavaScript enabled to view it.

 


Cutting Fluid Link


 


zs200main

Extremely heavy duty Cross Cut Mitre Saw for Cutting Aluminium, Plastics and Wood

HUGE 200mm x 420mm Capacity at 90 Degrees !

Details:

  • Crosscut and miter saw with maximum depth of cut of 200 mm
  • Sturdy cast iron construction
  • Precise ball bearing guide of the tool carrier on hardened and grounded steel shafts
  • Manual feed
  • Rapid miter setting up to 65° horizontally and up to 45° vertically (up to 60° ZS 200N)readjustable positive stops lower
  • Saw blade protection suitable for connection with suction plant

 

 

Technical data:

model
ZS 200N
motor
400 V / 5.0 kW
speed
2800 U/min
length of cut
420 mm (bei 90°)
depth of cut
200 mm (bei 90°)

miter range
horizontally

45°-90°-20°

miter range
vertically

60°-90°-30°
sawblade-Ø
520 mm
suction plant
 
 
100 mm
weight
310 kg
 
 
 
Click to Enlarge:
 
 
info
Cutting Fluid Link

 

 

Graule AKF1 Endmiller

 

  • End milling machines model AKF 1 and AKF 2 for rectangular milling within a range of 8 mm flip-over height
  • Cutting depth and cutting height can be adjusted exactly via a handwheel
  • High cutting speed due to the large cutter diameter
  • Sturdy cast iron constructionprecise ball bearing guide of the tool carrier on hardened and grounded steel shaftsmanual feed the cutter spindle of end milling machine model AKF 2 is running in ball bearings on both sides on the tool side

 

Technical data:

 

model
AKF 2
AKF 1
motor
400 V / 2.0 kW
 
speed
2800 U/min
 
cutter-Ø
250 mm
200 mm
cutter supporting device Ø
 
40 mm

milling spindle length

8.5 mm
6.5 
(8.5 mm)

milling width

320 mm
350 mm
milling depth
80 mm
45 mm
thickness of profile
80 mm
 
suction plant
-
 
weight
95 kg
87 kg

 



 

 

 

Graule AKF 4200 Endmiller

 

 

  • End milling machine model AKF 4/200 and AKF 4/250 for rectangular milling operations up to 90 mm.
  • Cutting depth and cutting height precisely adjustable via hand wheel
  • High cutting speed through big cutter diameter
  • Sturdy cast iron constructionprecise ball bearing guide of the tool carrier on hardened and grounded steel shaftsmanual feed the cutter supporting device is running in ball bearings on both sides thus assuring a smooth and non-oscillating milling operation.

 

Technical data:

 

 

model
AKF 4/200
AKF 4/250
motor
400 V / 2.0 kW
 
speed
2800 U/min
 
cutter-Ø
200 mm
250 mm
cutter supporting device Ø
 
40 mm

milling spindle length

75 mm
90 mm

milling width

350 mm
milling depth
45 mm
80 mm
thickness of profile
130 mm
140 mm
suction plant
80 mm
weight
85 kg
95 kg

 



 

 

 

Graule AKF 6200 End Miller

 

 

 

  • End milling machines model AKF 6/250 and AKF 6/300 rectangular and bevel milling operations up to 160 mm
  • The working stroke of the milling unit can be adjusted to the profile width within seconds, thus shortening the work flow considerably
  • High cutting speed due to high number of revolutions (4000 rpm) and large cutter diameter
  • Sturdy cast iron construction precise ball bearing guide of the tool carrier on hardened and grounded steel shaftsmanual feed The cutter supporting device is running in ball bearings on both sides thus assuring a smooth and non-oscillating milling operation.

 

Technical data:

model
AKF 6/250
AKF 6/300
motor
400 V / 3.0 kW
 
speed
4500 U/min
3600 U/min
cutter-Ø
250 mm
300 mm
cutter supporting device Ø
 
40 mm

milling spindle length

 
100 mm
milling width
305 mm
375 mm
milling depth
80 mm
105 mm
thickness of profile
150 mm
 
suction plant
80 mm
weight
190 kg
225 kg

 



 

 

 

Graule AS450 Notching Machine

 

 

 

  • The notching machine AS-450 is a well-proven machine in aluminium construction
  • Two independently arranged sawing units enable various notches at the profile bar ends
  • The vertical saw blade can be tilted up to 45? via a worm drive with a crank handle the horizontal saw blade can be adjusted in height and depth via column guides precise ball bearing guide of the tool carrier on hardened and grounded steel shaftssturdy cast iron construction manual feed

 

Technical data:

 

motor
400 V / 3.0 kW
speed
 
2.800 U/min
tool -Ø
350 mm
tool spindle diameter Ø
40 mm
notching height
 
153 mm
notching depth
 
110 mm
notching width
 
250 mm
feed
 
manuell
weight
 
400 kg

 



 

 

 

Graule AS-U-450 Notching Saw 

 

 

  • The notching machine AS-U-450 is a well- proven machine in aluminium construction
  • Two independently arranged sawing units enable various notches at the profile bar ends
  • Both saw blades can be swivelled within the range of +/-45? via a worm drive with a crank handle the support table can be adjusted in height and depth via column guides precise ball bearing guide of the tool carrier on hardened and grounded steel shaftssturdy cast iron construction manual feed

 

 

Technical data:

 

motor
400 V / 2.0 kW
speed
 
2.800 U/min
tool -Ø
400 mm
tool spindle diameter Ø
40 mm
notching height
 
153 mm
notching depth
 
128 mm
notching width
 
250 mm
feed
 
manual
weight
 
540 kg



 

 

 

Graule AS-V-550 Notching Saw 

 

 

  • Notching machine AS-V-550 for fast and efficient cutting of transoms in wall facing
  • Vertical notching saw with pneumatic sawing unit feed and stationary bearing for shaped wood
  • The two independently working sawing units run pneumatically on solid, vertical linear guides (shaft diameter 40 mm)
  • Working stroke drive is effected via a two-hand safety control
  • The sawing unit I can be tilted into an inclined position of 45? to the outside and up to 20? to the inside via a worm gear with a crank handle
  • Electronic digital display of the angle setting
  • Digital display of the notching height and depth

 

 

Technical data:

 

motor
400 V / 3.0 kW
400 V / 2.0 kW
speed
 
2.800 U/min
tool -Ø
550 mm
350 mm
tool spindle diameter Ø
50 mm
40 mm
notching height
 
210 mm
notching depth
 
110 mm
notching width
 
150 mm
feed
 
automatisch
weight
 
480 kg

 



 

 

 

Graule AS-P-550 Notching Saw 

 

  • Automatic notching machine AS-P-550 with hydro-pneumatic sawing unit feed and stationary profile support
  • Two independently arranged sawing units enable various notches at the profile bar endsboth saw blades can be swivelled within the range of +/- 45? via a worm drive with a crank handle setting of notching height is carried out via both sawing units precise ball bearing guide of the tool carrier on hardened and grounded steel shaftselectronic-digital angle indicator for three axis digital counter display for notching height and notching depth sturdy cast iron construction

 

 

 

Technical data:

 

motor
400 V / 3.0 kW
speed
 
2.800 U/min
tool -Ø
550 mm
500 mm
tool spindle diameter Ø
50 mm
notching height
 
210 mm
notching depth
 
190 mm
notching width
 
180 mm
feed
 
automatic
weight
 
1250 kg